Responsive Menu Clicked Image

Our tactical body armor and SAPI plates are made of high-quality materials and a construction you can trust. The majority of are armor plates are NIJ tested and many of them are DEA compliant. This means that our armor is independently tested for performance standards at laboratories that are approved by the National Institute of Justice.

Our armor is not only useful for protection against bullets, but also from wreckage, blunt force and knives. The type of armor you need depends on the environments in which you will wear it. Individuals that primarily need armor for self-defense purposes will do fine with level II armor. This level protects against rounds from most 9mm handguns and is commonly worn by police officers. We also provide a selection of level IIIA and level IV plates that provide higher levels of protection for those in combat zones.

Browse our great selection of tactical body armor below:

Armor

PICK YOUR VIEW:
    • Active Response Carrier System (ARCS)
      Be properly equipped to engage real world threats with the Chase Tactical Active Response Carrier System (ARCS.)  The ARCS was designed for law enforcement officers to rapidly up-armor and provide protection from rifle fired munitions in a plate carrier that can immediately don over existing unifor . . .
      $410.43
      SKU: CT-ARCS
      In-Stock
    • Chase Tactical 3i5 Level III ICW Independently Tested Stand Alone Rifle Plates
      The Chase Tactical 3i5 Series is our next generation of NIJ 0101.06 independently tested products and is designed to defeat Level III threats from high velocity rifle rounds when used in–conjunction with a Level IIIA soft armor. The CT 3i5 is an extremely lightweight law enforcement and special op . . .
      $301.94$509.59
      SKU: CT-3i5
      In-Stock
    • Chase Tactical 3S10 Level III Stand Alone Single Curve Rifle Plate
      The Chase Tactical 3S10 is a Stand Alone Level III NIJ 0101.06 Compliant Ballistic Resistant Plate. Constructed from UHMWPE, the 3S10 is designed to be lightweight and provide protection against NIJ Level III projectiles. The 3S10 is an ideal armor plate to reduce load bearing weight, thus increasin . . .
      $371.16$457.68
      SKU: BD-HC-3S10
      In-Stock
    • Chase Tactical 3S9 Level III+ Rifle Plate NIJ 06 Certified & DEA Compliant
      The Chase Tactical 3S9 Series are NIJ 0101.06 Certified Stand Alone Plates. The 3S9 is also DEA Compliant taking the ballistic performance above and beyond NIJ 06 Standards. Providing protection from modern munitions, the BD-HC-3S9 is an ideal choice for end users seeking a high performing ballisti . . .
      $306.18$417.86
      SKU: BD-HC-3S9
      In-Stock
    • Chase Tactical 4S17 Level IV Rifle Plate NIJ 06 Certified & DEA Compliant – SINGLE CURVE
      The Chase Tactical 4S17 Series are NIJ 0101.06 Certified & DEA Compliant Stand Alone Single Curve Plates.  The 4S17 Hard Armor ballistic insert provides protection against projectiles, shrapnel and improves the performance of ballistic vest and tactical EOD search suits.  This insert comes in . . .
      $141.95$180.95
      SKU: CT-4S17
      In-Stock
    • Chase Tactical 4S17M Level IV Rifle Plate NIJ 06 Certified & DEA Compliant – MULTI CURVE
      The Chase Tactical 4S17M Series are NIJ 0101.06 Certified & DEA Compliant Stand Alone Multi Curve Plates.  The 4S17 Hard Armor ballistic insert provides protection against projectiles, shrapnel and improves the performance of ballistic vest and tactical EOD search suits.  This insert comes in . . .
      $141.95$313.95
      SKU:
      In-Stock
    • Chase Tactical 4SAS-7 Level IV Rifle Plate NIJ 04/05 Certified & DEA Compliant – MULTI CURVE
      The Chase Tactical 4SAS-7 Series are NIJ 04/05 Certified Stand Alone Multi-Curve Plates. The 4SAS-7 is also DEA Compliant taking the ballistic performance above and beyond NIJ 06 Standards. Providing protection from Armor Piercing munitions, the 4SAS-7 is an ideal choice for end users seeking an aff . . .
      $122.95$284.95
      SKU: CT-4SAS7
      In-Stock
    • Chase Tactical 4SAS-7 Level IV Rifle Plate NIJ 04/05 Certified & DEA Compliant – SINGLE CURVE
      The Chase Tactical 4SAS-7 Series are NIJ 04/05 Certified Stand Alone Single Curve Plates. The 4SAS-7 is also DEA Compliant taking the ballistic performance above and beyond NIJ 06 Standards. Providing protection from Armor Piercing munitions, the 4SAS-7 is an ideal choice for end users seeking an af . . .
      $122.95$160.95
      SKU: CT-4SAS-7
      In-Stock
    • Chase Tactical AR500 Level III+ Stand Alone Rifle Plate NIJ 0101.06 Certified & DEA Compliant
      The Chase Tactical AR500 is an all steel based AR500 / MIL46100 compliant product.  Unlike other AR500 Steel armor plates available on the market, the BD-HC-AR500 plate is the first to receive NIJ 0101.06 Certification and is also DEA Compliant so you can purchase with confidence.  It is designed . . .
      $84.10$121.90
      SKU: BD-HC-AR500
      In-Stock
    • Chase Tactical Bump Helmet, Non Ballistic
      Bump Helmet (Non Ballistic) Features: Lightweight Design/Non Ballistic Upper dovetail accessory rail for mounting devices such as low-profile lights and helmet cams Lower dovetail accessory rail for mounting communication headsets, battery pack, and other accessories Top and side strips of loop for . . .
      $179.95
      SKU: CT-BUMP1
      In-Stock
    • Chase Tactical DCS Level IIIA Soft Armor Package
      The Chase Tactical 3A300 Level IIIA DCS Soft Armor Package is specifically designed for the Warrior Assault Systems DCS Plate Carrier.  The Level IIIA soft armor is tested to meet NIJ 0101.06 Level IIIA Standards. Plate Backer comes in a set of (2) 10.50″ x 11.50″ SAPI style and Cummerb . . .
      $170.67$410.95
      SKU: 3A300-DCS
      In-Stock
    • Chase Tactical Level IIIA Ballistic Shield – Pistol Rated
      The Chase Tactical FRSIIIA Ballistic Shield is designed to be lightweight and portable. Ideal for patrol and tactical deployments, the FRSIIIA provides superior bullet resistance to modern day threats facing law enforcement. Constructed from UHMWPE, the ballistic panel is encased in a nylon sleeve . . .
      $836.65$1,860.35
      SKU: BD-HC-FRSIIIA
      In-Stock
    • Chase Tactical Striker ACH Level IIIA Combat Helmet
      The Chase Tactical Striker ACH IIIA is designed according to the latest US Military requirements, utilizing the most advanced ballistic protection against handgun ammunition. The shell is composed of multi-layered advanced composite; The harness assembly consists of the ACH Comfipad suspension syste . . .
      $769.95
      SKU: BD-STRIKER-CBT
      In-Stock
    • Chase Tactical Striker ACH Level IIIA High Cut Ballistic Helmet
      The Chase Tactical Striker ACH Level IIIA High Cut Ballistic Helmet is designed according to the latest US Military requirements, utilizing the most advanced ballistic protection against handgun ammunition. The harness assembly consist of the ACH Comfipad suspension system and a four point harness w . . .
      $389.95
      SKU: CT-STRIKER-H
      In-Stock
    • Chase Tactical Striker ACH Level IIIA Mid Cut Ballistic Helmet
      The Chase Tactical Striker ACH Level IIIA Mid Cut Ballistic Helmet is designed according to the latest US Military requirements, utilizing the most advanced ballistic protection against handgun ammunition. The harness assembly consist of the ACH Comfipad suspension system and a four point harness wi . . .
      $389.95
      SKU: CT-STRIKER-M
      In-Stock
    • Chase Tactical Striker ACH Level IIIA Standard Cut Ballistic Helmet
      The Chase Tactical Striker ACH Level IIIA Standard Cut Ballistic Helmet is designed according to the latest US Military requirements, utilizing the most advanced ballistic protection against handgun ammunition. The harness assembly consist of the ACH Comfipad suspension system and a four point harne . . .
      $360.95
      SKU: CT-STRIKER-S
      In-Stock
    • Chase Tactical Striker Level IIIA PASGT
      The Striker PASGT- Personnel Armor System for Ground Troops helmet is designed according to the latest US Military requirements, utilizing the most advanced protection against handgun ammunition. The shell is composed of a multi-layered advanced composite. The harness assembly consist of the standa . . .
      $313.95
      SKU: CT-STRIKER-PASGT
      In-Stock
    • Covert Plate Carrier Soft Armor Combo Package
      Covert Plate Carrier and 1 Set (Front & Back) Chase Tactical Level IIIA NIJ 06 Soft Armor specifically cut for the Warrior Assault Systems COVERT Plate Carrier. Warrior’s Covert Plate Carrier (CPC) MK1 is a low profile slick armor carrier designed to hold 10″ x 12″ SAPI or Shooter& . . .
      $350.00$375.00
      SKU: CPC-ARMOR-SET
      In-Stock
    • DRITEK Heavy Duty Hanger
      The Dritek Hanger is the toughest and most versatile garment hanger – in fact it can comfortably hold 66 Lbs! It’s the perfect solution for hanging heavy garments or garments that need to be hung outdoors to dry or air. It enables garments to be hung safely and securely, in a huge variety of sit . . .
      $34.95
      SKU: DT
      In-Stock
    • Dynamic Combat System (Multi Curve) NIJ 04/05 CERTIFIED
      Chase Tactical and Battalion Defense have collaborated to put together the Dynamic Combat System.  This system comes complete with (2) BD-HC-4SAS-7 9.50″X11.50″ Shooters Cut NIJ 04/05 Certified Level IV Stand-Alone Multi Curve Rifle Plates and a Warrior Assault Systems DCS Plate Carrier . . .
      $497.50
      SKU: DCS-4SAS-MC
      In-Stock
    • Dynamic Combat System (Single Curve) NIJ 0101.06 CERTIFIED
      Chase Tactical and Battalion Defense have collaborated to put together the Dynamic Combat System.  This system comes complete with (2) BD-HC-4S17 9.50″X11.50″ Shooters Cut NIJ 0101.06 Certified Level IV Stand-Alone Multi Curve Rifle Plates and a Warrior Assault Systems DCS Plate Carrie . . .
      $487.50
      SKU: DCS-4S17-SC
      In-Stock
    • First Spear Hybrid Helmet Cover – MICH/ACH
      Individually sized and 100% fit tested the FirstSpear Hybrid Helmet Cover is designed to fit MICH/ACH Ballistic Helmets. A stretch fit ensures that it remains in place during Free Fall or Rotary Wing Operations. Loop is positioned for attachment of IFF capabilities and is pattern/color matched. Perf . . .
      $66.48
      SKU: FS-HC-MICH
    • First Spear Hybrid Helmet Cover – OpsCore FAST
      **NOTE** These covers are sized for FAST Ballistic Helmets. If you are purchasing a cover for a FAST Carbon or Base Jump Helmet, you will want to get it in one size smaller than your helmet. Individually sized and 100% fit tested the First Spear Helmet Cover is designed to fit either the Ops Core &h . . .
      $69.98
      SKU: FS-HC-H-FAST
      In-Stock
    • Helmet Cube
      Helmet Cube by TacProGear. *Helmet not included
      $154.95
      SKU: HA-H-CUBED
      In-Stock

What to Consider When Purchasing Body Armor:

Comfort:
If you need to wear your carrier with armor on a regular basis, you want to be sure that it’s comfortable and that you can easily run, bend and maneuver your body. If your vest or plates are uncomfortable or too hot, you are less likely to wear them, putting yourself at greater risk than you would if you bought lighter, more comfortable armor that you can wear on a regular basis.

Size and Weight:
Most of our armor is lightweight, ranging from less than a pound to about 6 pounds. Some of our ballistic plates are so thin, they are only a half an inch wide. If you do undercover work, you want armor that is lightweight and inconspicuous for easy wear under casual clothing.

Browse our selection of high-caliber body armor and make your order today. Our products are sure to meet your protection standards for both offensive and defensive operations. We are happy to answer any questions you may have about finding the right armor for you.