Responsive Menu Clicked Image
HomeShopPlate Carriers & Chest RigsPlate CarriersWarrior Assault Systems DCS AK 7.62mm Plate Carrier
Warrior Assault Systems DCS AK
  • Warrior Assault Systems DCS AK
  • Warrior Assault Systems DCS AK
  • Warrior Assault Systems DCS AK
  • Warrior Assault Systems DCS AK
  • Warrior Assault Systems DCS AK

Warrior Assault Systems DCS AK 7.62mm Plate Carrier


$367.95

SKU: W-EO-DCS-AK
Or Get a Quote for Bulk and Custom Orders
GET A QUOTE
Share Button
Description

Warrior Assault Systems DCS AK

The DCS (Dynamic Combat System) is a lightweight, low profile system which is rugged, yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators the DCS is suitable for both Special Forces requirements, and PSD Operations. The DCS can hold large size plates front and Back, and has the ability to carry either “6 x 6” or “6 x 8” side plates. NIJ Level IIIA Front, Back and Side Armor can also be used with I.C.W. style Plates and for additional protection against I.E.D.s armor carrier, with removable sides.

The shoulders are fully adjustable and have an Emergency Release on one side which frees the left hand side shoulder section and allows the operator to remove the Rig without having to remove his helmet. The Side sections of the DCS are fully adjustable for size and can be adjusted in under 15 seconds. 3D Spacer Mesh lining is used for comfort and allows body heat to move away from the bodies surface while assisting in air flow to provide cooling.

The DCS was developed to be worn in tandem with the Warrior Frag Belt (sold separately).

The DCS AK comes standard with:

  • 5 Open Mags for 7.62mm AK Mags
  • 2 Small Utility / Medic Pouches

Receive a FREE Tough Hook with the purchase of every Warrior Assault Systems DCS Plate Carrier! (If selected color is out of stock, you’ll be given an alternate color)

500D Cordura Performance Specifications

  • Weight: 7.1 Ounces per Square Yard
  • Tensile Strength: Warp 453 lbs / Fill 348 lbs
  • Tears Strength: Warp 14.1 + lbs / Fill 14.1 + lbs
  • Abrasion: Wear Cycles 1955
  • Water Repellency: 100%

Webbing

  • Genuine US Mil Spec Webbing
  • 25mm (1 Inch ) Breaking Strain: 1200 lbs
  • 38mm (1.5 Inch ) Breaking Strain: 1800 lbs
  • 50mm (2 Inch ) ) Breaking Strain: 2200 lbs
  • MultiCam Products now available with official MultiCam approved Murdock webbing.

Infra-Red Properties

  • All our Clips, Fabrics, Plastic Hardware, Threads and MultiCam/Coyote Webbing are treated at source to deliver the lowest I.R. Signature possible.

Soft & Hard Armor

  • This product is capable of holding Soft  & Hard Armor. Contact us for more details.

Reviews

Reviews

There are no reviews yet.

Be the first to review “Warrior Assault Systems DCS AK 7.62mm Plate Carrier”

Related Products

    • Warrior Assault Systems DCS M4 Plate Carrier
      Warrior Assault Systems DCS M4 Plate Carrier
      The DCS (Dynamic Combat System) is a lightweight, low profile system which is rugged, yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators the DCS is suitable for both Special Forces requirements, and PSD Operations. The D . . .
      $367.95
      SKU: W-EO-DCS-M4
      In-Stock
    • Warrior Assault Systems Elite Ops Slimline Harness
      Warrior Assault Systems Elite Ops Slimline Harness
      Warrior’s fully adjustable elasticated harness for use with Warriors PLB Belts and Armored Frag Belts. It is ideal for use under Body Armor.
      $49.95
      SKU: W-EO-SLH
      In-Stock
    • Warrior Assault Systems Enhanced PLB Patrol Belt
      Warrior Assault Systems Enhanced PLB Patrol Belt
      Warrior’s Enhanced Padded Load Bearing Patrol belt (PLB). The inside wall of the belt accommodates extra padded sections made from closed cell foam and covered in air mesh fabric for ultimate prolonged comfort. 4 I.T.W. Non I.R. reflective D Rings allow the attachment of Warriors New Low Profi . . .
      $92.95
      SKU: W-EO-PLB
      In-Stock
    • W-EO-901-Z-BRM4-ATFG-1
      Warrior Assault Systems 901 Elite Ops M4 Bravo Chest Rig
      The Warrior Elite Ops 901 Bravo M4 is set up on the 901 Front Opening (Patent Pending) MOLLE Platform which has revolutionized the use of the modern Chest platform. The 901 base has always been the basis for all the 901 rig variants, and we all know how good this kit is when used in … Continu . . .
      $259.95
      SKU: W-EO-901-Z-BRM4
      In-Stock